I've inserted manually an old marathon effort (1994) and the best efforts table by distance hasnt been updated, some idea about what is going wrong ?Many thanks
Hi everyone, first message here since I got my Membership 🙂I'm training for a marathon and noticed that Strava consistently reports better pace than my friend I'm running with who's using Nike Run. Upon closer examination we noticed that Nike applies aggressive smoothing to the GPS data, while Strava leaves lots of wiggles in. Compared to a map-based route plan the Strava distance is inflated almost 3% (!) due to the wiggles, while Nike is quite close to the theoretical map distance.This is explained in https://support.strava.com/hc/en-us/articles/216919487-How-Distance-is-Calculated but the GPS smoothing explained there is either not working or not aggressive enough. The correct value is probably in the middle between "map" and "snake lines all the way", but as it stands, Strava is giving me a better pace than I'm actually running due to this.My friend told me she actually left Strava due to this and honestly I'm considering the same - a 3% difference is significant
Many of the leaderboards for segments in urban areas (especially those next to highways) are riddled with blatant vehicle travel "rides". In nearly every case, a rider neglects to stop recording their ride when they get in the car to drive home. The result, in the case of most segments following major roadways, is the top 30 leaderboard spots boasting outrageously inhuman times--i.e. 72 mph on a flat road for 10 minutes, etc. I suggest that a flagging algorithm should be setup in the Strava software that automatically removes certain rides from the leaderboard under strict parameters. For example, on a flat/uphill road, it is physically impossible to ride a bicycle, electric or otherwise, faster than 70 mph, for any length of time, barring outrageously extreme circumstances. To prevent vehicle travel from clogging up an upsetting proportion of urban segment leaderboards, Strava could auto-flag those rides which exceed human-effort plausibility, such as the parameter described abov
Hello Strava team,I am facing the issue with getting the all needed activities from the club using HTTP request: https://www.strava.com/api/v3/clubs/1066042/activities?per_page=200&page=1As an example please take a look at the user: Krzysiek | Szop | Katolo | Strava Cyclist Profileas he has clearly 3 activities recorded but I am able only to fetch 2 activities using API
Hey guys. Is there any way to get active calories using Strava API (or even as regualr user in strava app)? Like they have it in Garmin. Looks like Strava doesn't do thatIf not, is it proper way just to do something like 0.9 * calories? But this way will not work if the activity wasn't "active" enough. If I'm sitting at the table i think strava will give me some "calories" value - and all of them won't be active, so I can't just multiply by 0.9
I am a newbie with Strava and recorded a route that my friends have asked me about. Then I marked it as public and saved it.Now I can see it as a "My Route" but not when searching for routes in my Android phone.What am I missing? Any advice is appreciated.Also, when searching for routes on my Android device, I can only select one of "Mountain Bike Ride", "Gravel Ride" or "Ride". Is it possible to search for all three kinds in one search, like "OR-ing" the conditions together?
Is it possible to have live coaching in strava, maybe as we're going through different segments or when our heart rate is at a certain point? Would love to have this for interval training.Not as big of a fan of nike run club anymore so hoping this is something in the pipelines, curious what others think!
When i am trying to connect more than one athletes.I got a error Error 403: Limit of connected athletes exceeded.I checked my settings i saw that no of athletes allowed to connect - 1.Its a issue because of athletes limit or my side.If athletes limit issue how can i increase the limit.
Hi, API sends strange laps data via getLapsByActivityId for short activities (less than 5km) with incorrect start_index and end_index of each lap.For example, https://www.strava.com/activities/11280411371/lapsEach lap is equal 1km.API for it returns:"distance": 1000,"lap_index": 1,"split": 1,"start_index": 0,"end_index": 93,In Streams data distance for index 93 is 300 m, time 93 seconds. Should be 1000 m and about 284 seconds. The same for other laps. So all data from Streams matched with such indexes are incorrect and doesnt correspond with lap data in Strava via activity link above.For activities with distance above 5km all data is correct. Will be appreciated for any advices how get correct data for laps.Thanks!
When calling https://www.strava.com/oauth/authorize to obtain the code and scope, pull up the page according to the Android Sample code in the document. Then click "Authorize" on the page and "Request Failed" will pop up like this: When I put the request into the webView, the strava login request will be played first, but after clicking Log in using google, it is not redirected to the user authorization page, but directly goes to the strava homepage. How can I get "code" and "scope" in Android?
Initally I'm getting the first Authorization with GET - https://www.strava.com/oauth/authorize -> scope = activity:read_all using the access token and storing the refresh token.Now I'm getting the activities GET https://www.strava.com/api/v3/activities -> everything is fine!But when the original access token expires, I'm getting a new access token with the refresh token (https://www.strava.com/oauth/token) I stored before. With the new access token I'm doing the same GET request to get the activities now the issue happens, I don't know why. The activity:read_permission should be set in the first call now I'm just getting a new Access token with the original refresh token, I can not set permissions here. What do I miss?Status: 401 (Failure){"message": "Authorization Error","errors": [{"resource": "AccessToken","field": "activity:read_permission","code": "missing"}]}
Hi! Just wanted to ask if there is any way to pause and resume an activity (running or biking) through the API?Last I saw, there didn't seem to be a way, just want to see if this is still the case, or if there are any work arounds?Thanks!
First of all, I want to appreciate you for making the API publicly accessible. But day to day I face issues, or lack of features, that make integrating with Strava harder. I hope this one is not another thread unanswered (or poorly answered) as with most of the threads I opened so far. Otherwise I'm afraid I'll be forced to just stop contributing. I strongly hope that's not the case.This time is about the webhook events: they do not include the sport type. IMO, this is a key field, mostly for create aspect type.As ourselves, I'm sure there are a lot of people that will need this because their App is just related to a single (or subset of) sport: cycling, running... Not having this field implies a call to the API per event to check whether if the event should be processed or not. This makes the event almost unusable.Hoping for an answer,Thanks.
Hi After syncing strava activity to Google fit,the steps shows as 0
Hello I noticed a discrepancy in pace/min during a Track activity if I compare Garmin Connect with Strava on the same activity.I am using during track session the dedicated Garmin Track run activity so it is pretty accurate by setting the right lane using on track.Can this be cured and have a match between Garmin and Strava?
In the webhook documentation at https://developers.strava.com/docs/webhooks/ I have noticed some usages of “”‘’instead of the correct""''It at least made me confused for a while until I figured it out.
my polar device's barometric altimeter is very inaccurate, resulting in completely wrong power estimates for activities and segments. it would be nice to be able to trigger the ... "adjust elevation" command of strava via API in order to use strava basemap data? this way an automation task could be used to fix elevation of activities in strautomator or similar tools.
hello everyone,as far I have written, it is for me necessary, that the software himself start on every new day a fresh activity and save the old one from the day before as the activity from this day if this would not be possible, the app is worthless for megreetingshannes how can I automatically start every day a new activity and save the old one from the day before?
I'm currently working on integrating my climbing app with Strava, and I've hit a bit of a roadblock. When I manually create an activity on Strava through the browser, I have the option to enter the elevation. However, when I try to do the same thing programmatically using the createActivity API, I can't seem to find an option to specify the elevation.This is crucial for my climbing app's functionality, and without it, integrating with Strava is kind of pointless. Can anyone shed some light on what I might be missing here? Any help or insights would be greatly appreciated. Thanks in advance!
Hallo allemaal, Als Relinen herstel serviceman en fanatieke marathonloper die zijn gezondheid serieus neemt, zoek ik een apparaat of Strava-systeem dat me kan helpen mijn gezondheidsdoelen te bereiken. Kent iemand iets dat bij mijn behoeften past? Ik wil graag een tool die mijn hartslag, calorieverbranding en slaappatronen kan bijhouden, en die naadloos integreert met mijn hardlooproutine en dagelijkse activiteiten. Heeft iemand ervaring met zoiets? Alle suggesties zijn welkom!Bedankt!TRANSLATION: Hello all, As a Relinen recovery serviceman and avid marathoner who takes his health seriously, I am looking for a device or Strava system that can help me achieve my health goals. Does anyone know anything that fits my needs? I'd like a tool that can track my heart rate, calorie burn, and sleep patterns, and that integrates seamlessly with my running routine and daily activities. Does anyone have experience with something like this? All suggestions are welcome! Thank you!
I have a large number of users attached to a push subscription - all was working until around the 28th April. Now only a handful of users' data is coming through.For those that aren't I have verified I have live keys/tokens for them and I am able to manually poll and fetch their activities.My endpoint seems to be working and I have had it write to a log file each time it is called and that log file is very barren!I have checked my subscription is still set up correctly using the push_subscriptions endpoint and it looks fine.The one elephant in the room is that I have moved the site to a new host in the small hours of Monday morning. So the IP address has changed but the domain is still the same - I'd be suprised if you are using the IP address anyway.Any thoughts on what is going wrong here? Or maybe there's a fault with the subs service at the moment?Andrew
Hi there, we have created subscription as per details provided at https://developers.strava.com/docs/webhooks/. However, our callback url is behind an AWS WAF and hence notifications from Strava are getting blocked. Can you please provide a list of IPs to whitelist so that we can unblock Strava traffic?
I have been using Strava API to extract club data to collect data from 2024 from all members. Because the club was made in December 2023, I was originally got some data from 2023, which I excluded through ignoring the first 40 runs.Since then, when I run the application, without excluding the runs and the only if statements being to only include runs, the API extracts 207 runs, whereas I am expecting 218 plus those extra 40 runs that were originally included.Looking at each page, as only 200 results are allowed per page, the first page has 200 results, second page 7 and third page 0.Does anyone have any idea what may be causing the issue where the earliest runs are being excluded?
hey guys! I just ran a long run and uploaded it from Garmin connect. It usually works fine but the run is not connecting to the stats on my profile. I checked to see it's visibility ect n it says it was fine- anybody else had this? Thank you!
Hello,I requested a rate increase via email over a month ago and have not yet received a response. We now cannot serve our user base anymore and it affects our service. Our growth is still significant, and we strive to minimize the number of requests. In the past, I proposed a solution that would enable developers to easily and effectively reduce the number of requests. However, it is currently not implemented yet (see https://communityhub.strava.com/t5/developer-discussions/developer-webhook-events-api-for-new-workout-add-field-workout/td-p/6479).Best regardsJan
Already have an account? Login
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
Sorry, we're still checking this file's contents to make sure it's safe to download. Please try again in a few minutes.
Sorry, our virus scanner detected that this file isn't safe to download.
