Solved

Perhaps this is answered somewhere already, but so long as the athlete's posts are public, am I able to grab their activities with the API (as long as I've authenticated)? Or do I need them to do something for me so they're authenticated, too? I would like to create an application that can grab the weekly activities from the athletes I coach and display them on a webpage. 

Hi, I have a series 8 watch and all health connections enabled but no calorie count is showing up on my Strava when I run, can someone advise?

Can we add segments for walking as well?

I was trying to build an app for our cycling club to conduct some monthly challenges and for this i want to store athlete data in my application database and need. But when I go through the  API agreement i saw "you may not collect, use, store, aggregate or transfer any Strava Data in any manner except as expressly permitted by us for the use of your Developer Application".So how can i get permission from starve to store these data. For app like this need to store the athlete data in the database and aggregate the result to find the topers. Did anybody know how to get a permission from strata. or is this not needed? 

Can specific leaderboard filters be applied in segment URL reference?Example: https://www.strava.com/segments/33639581?filter=overallCan specific filters be applied on URL reference for example TODAY, MEN?  If so, is there a list of supported filters for use in URL references in addition to OVERALL in example above? 

When reloading the feed that has a photo, the app does not divide the photo with the map. The app places the photo occupying the entire feed.

 Hi,Completely new to Strava; I've planned a route, now would like to install waypoints at particular km intervals, lets say every 30km - the route is a few hundred kms.  How do I do this? I am hovering over the KM marker flags and trying to add a waypoint by clicking, but it is not letting me. Thanks for any help

I'm not sure how important navigation is to many on here, but I recently upgraded from an Edge 520 to the Edge 1040, and the navigation capabilities are so much better... it even alerts to upcoming dangerous (tight) corners! If I can muster the energy, I may put a quick post together on here about my experiences so far with the 1040 (navigation: great, sync: bad).  

In the Android app the Weekly Intensity does not show all my activities. For example this week the Activities this week under Weekly Intensity only shows activities from Monday through Thursday. Activities done on Friday through Sunday are not shown. Last week, my activity from Sunday is not shown. 

I just moved to a new city and decided to open up heatmaps to look for local routes. While I was under my own personal heatmap, I noticed something very strange... 2 activities were recorded in places I have NEVER been, one in Sanfran CA and the other in Seattle WA. They are not just straight lines indicating a GPS error either, and I live in MI anyway, closest I've been to either of those places is Utah and Nevada. When I zoom in on the activity, they are not just in random places either, they both appear to correlate directly over a building. What is going on here exactly? If they had been straight lines in completely random places I'd chalk it up to GPS errors, but Seattle and San Francisco? Two places a lot of scam calls and junk mail comes out of? 

We're working on an app that creates activities, and we're wondering if it's possible to add images and a hyperlink in the description? Just wondering what's possible, thanks!-Dan

Our customers are asking for privacy controls for new uploads. It appears the API was changed in 2018 and no longer supports "private" flag. Just requesting to bring back this feature.I understand the user can set the default privacy setting for new uploads through the web interface. 

 I like the concept of fitness as a ratio of effort/intensity vs rest over time. But the calculation needs to be updated, because as it stands, it gives me peaks of around 110, and lows of about 11 in the past two years. I know it's relative, and it's accurate that my intensity and frequency changes seasonally, but it's misleading in that it looks like I'm 10x more fit in the summer than in the winter. I'd like the range to be more indicative of performance potential. Ex: in the winter when my score is 11, i can probably still run a 5k, bike a century, etc (whatever baseline metric) about 70-80% as fast as my peak. So I'd expect the fitness scores to reflect that. If my peak is 110, my low should be 70 or so. Not 11...

My lap times seem to include time when I have my ride on "pause".  I do not think it should do this. Maybe this is an artifact of the way my Garmin works and not Strava calculations. I do not know.

I've recently had minor problems when I have cropped a bike ride (something I usually do to get ride of "noise" at the start and end of a ride) and I see a spurious duplicate of the ride before it was cropped.  I've done about 900 bike rides and never had the problem until about 2 weeks ago and it's happened again today - I crop the ride as normal and then I notice a copy of the pre-cropped ride in my feed but with the Activity set to "indoor cycling" and showing no Segments (the copy has the same start time as the cropped version and is slightly longer).  It's almost as though the cropping process somehow failed and didn't delete the original version.  Is it safe to delete the copy ? It's obviously related to the cropped version and I don't want to risk losing that (and the associated performances).

From around March 2022, the place names on the map displayed in the activity will be in English.Before that, it was displayed in the language selected when displaying the Strava web page.Is it possible to restore the place name notation of the language selected on the web page as before?

I don't know if Strava is just trying to be really supportive, but I live in a relatively flat area (between the mountains anyway), and I have received numerous notifications from Strava congratulating me for climbing 2m on my commute to work. Perhaps the bar could be raised a little, I don't need kudos for that. 

I would like to build a webhook that assigns the correct bike to newly uploaded activities by looking at what ANT+ sensors were used with the activity. Would it be possible to add identifiers of the ANT+ sensors to the Activity GET request to enable this functionality? Thanks,Matt

Has anyone solution for this unwanted problem with the app on Android? Even if you force stop the app, it will resurrect itself not long after as a background process, always triggered by the opening of an unrelated app!!!??? Quite invasive and worrying actually.

The Club API documentation still states that the response for a successful request be HTTP code 200 An array of SummaryAthlete objects. 

I feel I have to do loads of effort in Zwift. Also my w/kg is not matching the real power I am doing. For example, yesterday in a 23km race (E) had an average of 222W but finished last and 5 minutes behind guys with an average power lower than 100W. I would like to know what could I do to calibrate this issue. It started after I changed my bike on the trainer as before I could easily do 2W/kg.

Hi Folks,Trying to use the API to get some of my data out of Strava. I managed to created an API token which works as a bearer token to access the API.However I noticed the scope is "read" per:In order to access https://www.strava.com/api/v3/athlete/activities I need a token with "activity:read_all", but I cannot find anywhere to change the scope of my access token. Can anyone point me to the documentation that describes granting different scopes ? 

Hello Strava Community,Kudos to Strava for showing us in our feed, reminders of previous rides, and other activities.  I love this feature, and hope it continues.  Really nice when these pop up in our personal feed, and I reminisce where or how I rode from a year or two year ago from the activity anniversary date.Thank you, Strava!  Richard Forzani

Hi there, I’ve tried the steps in the article here. Something weird I noticed is that I managed to get the 4 runs I did in Dec imported. However, I can’t seem to get my 1st Jan 2023 run sync to the the app. Is there a bug or is there something that I did wrongly? the only difference I noticed was that during the Dec runs, I’ve used the workout app to track, however on Jan’s 1st run, I used the strava record app to track during the run. Can help assist me?

Hi, In previous Strava Web App versions there was always a 'star' symbol at the beginning of each segment line (in found segments list for given route) to easily add a segment to the list. But it is now missing even though this functionality was useful. See attached printscreen.